Camion volvo fh 500 - falkom faw 25.000 - !! viewing by appointment only !! 8x4 motorină euro 6 second-hand

Tarif de vânzare :

Preț la cerere

Return to search

Camion Volvo 500 - FALKOM FAW 25.000 - !!...

Ref: HE-NE

Camion Volvo FH 500 - FALKOM FAW 25.000 - !! Viewing by appointment only !! 8x4 Motorină Euro 6 second-hand

130 000 km
37 Tone
03/01/2020
6004 RM Weert
Volvo Euro 6
Volvo

Informaţii principale
Ref. client:	HE-NE
Ref. website:	11304821
Caroserie	--
Marcă	Volvo
Gamă (marcă : Volvo)	FH
Model	500 - FALKOM FAW 25.000 - !! Viewing by appointment only !!
Stare	Second-hand
Data primei înmatriculări	03/01/2020
Ţara	OLANDA
Constructor	Volvo

Informaţii suplimentare Volvo 500 - FALKOM FAW...
Data ultimei verificări tehnice	03/01/2026
Data de expirare a înmatriculării	03/01/2027
Retarder hidraulic

Tonaj
Sarcină utilă	13.28 Tone
Masă Proprie	23.73 Tone
Sarcină Utilă Maximă	37 Tone

Anvelope
Stare şi dimensiuni anvelope	22.5

Informaţii cabină FH
Lungime cabină	Scurtă

Echipament Camion Volvo
Suspensie pe aer Suspensie mecanică ABS Cruise Control

Caracteristici Volvo FH
Kilometraj	130 000 km
Norme Euro	Volvo Euro 6
Ţara (gamă)	OLANDA

Starea utilajului
Alimentare/Carburant	Motorină

motor
Putere	509 CP
Puterea motorului	375 kW
Capacitate cilindrică	12777 cm3
Număr de cilindri	6

Cutie de viteze și de transmisie
Specificaţii cutie de viteză	Automaat
Cutie de viteze	Cutie automată

Suspensie / Axe
Ampatament	5.6 metri
Osii	8x4

Echipament cabină
Climatizare Închidere centralizată

Observaţii
🇬🇧 Information in English: Additional options and accessories 2 Bedden Adaptive Cruise Control Cabinezijfenders Climate Control (ATC) Elektrisch spiegels Koelkast Lane Change Support Oliekoeler SMART TACHO 2 Standkachel Verstralers op het dak Volvo Dynamic Steering WhatsApp Zwaailampen Remarks Falkom wrecker installation type FAW 25.000 - One main arm. - A two-stage hydraulically extendable lift arm, very low; Highest step forearm 195 mm, arm length to center bus frame 4.55 m. - A fully hydraulic installation consisting of: - hoses - couplings - pipes - 8-function valve block - Two double-acting lifting cylinders take care of the up and down movement of the main arm. - The installation is also executed with a so-called "Powertilt" installation to minimize damage to spoilers e.d. - The assembly is assembled on a subframe, etc. in accordance with specifications of the truck chassis and sprayed in the primer (RAL 2004). - 2 anchors model working independently of each other standard. - A lift beam (100 x 100 mm tube). - Three sets of fork holders. - 4 sets of V forks. - 1 Set of chain forks. - 1 Set of euro forks (German version 1 set of euro forks model small and 3 set for axle forks). - Set of Scania claws with mounting brackets on the lift beam. - Set of air suspension forks. - 1 bus frame. - Tow bar mounted. - Shovel and broom mounted. - Oil tank. - Pulling device with trawler in combination with a semi-trailer link. - Supported drawbar coupling support. - Two 20 ton hydraulic winches (Sepson H 200), which are equipped with two speeds and a pneumatic freewheel. - Hydraulic double pump. - Radio remote control for all functions, excluding anchor shovels - Complete installation is stacked / metallized. - Built according to CE guidelines. - Assembly of the air hands and electrical connections of the truck at the rear in the body. - Luxury enclosure in aluminum version highly adapted to the 8x4 chassis incl. fly-over, mounting the standard forks in the enclosure, LED cabinet lighting, installation installation on the chassis. - LED light bar mounted on the flyer. - Lighting control switches mounted in the control box and in the cabin. - LED flash lamps mounted at the rear. - 6 work lights mounted (under the flyer, high at the rear and low). - LED lamps mounted on the corners of the enclosure. - Starting aid 12/24 volts. - Air reel mounted. - Spray the installation in finish. - 7-wire electrical cable reel installed. - Container for counterweight mounted behind the cab. - Base plate for lateral stability (standard legs only) - 2 fork raisers - 2 pieces of anchor plates for Wheel chocks - Two WLL 15 tonne folding discs - European approved buffer beam at the rear. - Pulling device with pin 40, 50 and 60 mm - 2 models towing eyes. - RDW inspection and, if necessary, TüV. - Ballast under the bumper. More information Cab: Globetrotter, single Axle 1: Tyre size: 385/65 R22.5; Max. axle load: 9000 kg; Steering Axle 2: Tyre size: 385/65 R22.5; Max. axle load: 9000 kg; Steering Axle 3: Tyre size: 315/70 R22.5; Differential lock; Max. axle load: 9500 kg; Reduction: hub reduction Axle 4: Tyre size: 315/70 R22.5; Differential lock; Max. axle load: 9500 kg; Reduction: hub reduction Registration number: 28-BPD-3 🇩🇪 Informationen auf Deutsch: Weitere Optionen und Zubehör Adaptive Cruise Control Kühlschrank Standheizung Weitere Informationen Kabine: Globetrotter, einfach Achse 1: Reifenmaß: 385/65 R22.5; Max. Achslast: 9000 kg; Gelenkt Achse 2: Reifenmaß: 385/65 R22.5; Max. Achslast: 9000 kg; Gelenkt Achse 3: Reifenmaß: 315/70 R22.5; Differenzialsperre; Max. Achslast: 9500 kg; Reduzierung: Ausenplanetenachsen Achse 4: Reifenmaß: 315/70 R22.5; Differenzialsperre; Max. Achslast: 9500 kg; Reduzierung: Ausenplanetenachsen Kennzeichen: 28-BPD-3 🇳🇱 Informatie in het Nederlands: Aanvullende opties en accessoires 2 Bedden Adaptive Cruise Control Cabinezijfenders Climate Control (ATC) Elektrisch spiegels Koelkast Lane Change Support Oliekoeler SMART TACHO 2 Standkachel Verstralers op het dak Volvo Dynamic Steering WhatsApp Zwaailampen Bijzonderheden Falkom wrecker installation type FAW 25.000 - One main arm. - A two-stage hydraulically extendable lift arm, very low; Highest step forearm 195 mm, arm length to center bus frame 4.55 m. - A fully hydraulic installation consisting of: - hoses - couplings - pipes - 8-function valve block - Two double-acting lifting cylinders take care of the up and down movement of the main arm. - The installation is also executed with a so-called "Powertilt" installation to minimize damage to spoilers e.d. - The assembly is assembled on a subframe, etc. in accordance with specifications of the truck chassis and sprayed in the primer (RAL 2004). - 2 anchors model working independently of each other standard. - A lift beam (100 x 100 mm tube). - Three sets of fork holders. - 4 sets of V forks. - 1 Set of chain forks. - 1 Set of euro forks (German version 1 set of euro forks model small and 3 set for axle forks). - Set of Scania claws with mounting brackets on the lift beam. - Set of air suspension forks. - 1 bus frame. - Tow bar mounted. - Shovel and broom mounted. - Oil tank. - Pulling device with trawler in combination with a semi-trailer link. - Supported drawbar coupling support. - Two 20 ton hydraulic winches (Sepson H 200), which are equipped with two speeds and a pneumatic freewheel. - Hydraulic double pump. - Radio remote control for all functions, excluding anchor shovels - Complete installation is stacked / metallized. - Built according to CE guidelines. - Assembly of the air hands and electrical connections of the truck at the rear in the body. - Luxury enclosure in aluminum version highly adapted to the 8x4 chassis incl. fly-over, mounting the standard forks in the enclosure, LED cabinet lighting, installation installation on the chassis. - LED light bar mounted on the flyer. - Lighting control switches mounted in the control box and in the cabin. - LED flash lamps mounted at the rear. - 6 work lights mounted (under the flyer, high at the rear and low). - LED lamps mounted on the corners of the enclosure. - Starting aid 12/24 volts. - Air reel mounted. - Spray the installation in finish. - 7-wire electrical cable reel installed. - Container for counterweight mounted behind the cab. - Base plate for lateral stability (standard legs only) - 2 fork raisers - 2 pieces of anchor plates for Wheel chocks - Two WLL 15 tonne folding discs - European approved buffer beam at the rear. - Pulling device with pin 40, 50 and 60 mm - 2 models towing eyes. - RDW inspection and, if necessary, TüV. - Ballast under the bumper. Meer informatie Cabine: Globetrotter, enkel As 1: Bandenmaat: 385/65 R22.5; Max. aslast: 9000 kg; Meesturend As 2: Bandenmaat: 385/65 R22.5; Max. aslast: 9000 kg; Meesturend As 3: Bandenmaat: 315/70 R22.5; Differentieelslot; Max. aslast: 9500 kg; Reductie: naafreductie As 4: Bandenmaat: 315/70 R22.5; Differentieelslot; Max. aslast: 9500 kg; Reductie: naafreductie Kenteken: 28-BPD-3 Référence parc : 323949, Année de construction : 2020, Nombre de roues motrices : 4, Informations pneus ou train de chaînes : Axle 1: Tyre size: 385/65 R22.5; Axle 2: Tyre size: 385/65 R22.5; Axle 3: Tyre size: 315/70 R22.5; Axle 4: Tyre size: 315/70 R22.5, Nombre d'essieux : 4, Suspension d'essieu, Stores, Capacité : 13tonnes, Capacité maximum : 13tonnes, Prise de force, Visière pare-soleil, Charge utile : 13.275tonnes, Autoradio, Nombre de portes : 2, Couchette chauffeur, Poids : 23.725kg, Frein à disque, Vitres électriques, Capacité de chargement : 13275kg, Tempomat, Cruise control, Vitres électriques, Type d'intérieur : Autre, Type de pneus : Jumelés, Couleur : Jaune
Vreau sa văd tot

Observaţii

🇬🇧 Information in English:
Additional options and accessories

2 Bedden
Adaptive Cruise Control
Cabinezijfenders
Climate Control (ATC)
Elektrisch spiegels
Koelkast
Lane Change Support
Oliekoeler
SMART TACHO 2
Standkachel
Verstralers op het dak
Volvo Dynamic Steering
WhatsApp
Zwaailampen

Remarks

Falkom wrecker installation type FAW 25.000
- One main arm.
- A two-stage hydraulically extendable lift arm, very low; Highest step forearm 195 mm, arm length to center bus frame 4.55 m.
- A fully hydraulic installation consisting of:
- hoses
- couplings
- pipes
- 8-function valve block
- Two double-acting lifting cylinders take care of the up and down movement of the main arm.
- The installation is also executed with a so-called "Powertilt" installation to minimize damage to spoilers e.d.
- The assembly is assembled on a subframe, etc. in accordance with specifications of the truck chassis and sprayed in the primer (RAL 2004).
- 2 anchors model working independently of each other standard.
- A lift beam (100 x 100 mm tube).
- Three sets of fork holders.
- 4 sets of V forks.
- 1 Set of chain forks.
- 1 Set of euro forks (German version 1 set of euro forks model small and 3 set for axle forks).
- Set of Scania claws with mounting brackets on the lift beam.
- Set of air suspension forks.
- 1 bus frame.
- Tow bar mounted.
- Shovel and broom mounted.
- Oil tank.
- Pulling device with trawler in combination with a semi-trailer link.
- Supported drawbar coupling support.
- Two 20 ton hydraulic winches (Sepson H 200), which are equipped with two speeds and a pneumatic freewheel.
- Hydraulic double pump.
- Radio remote control for all functions, excluding anchor shovels
- Complete installation is stacked / metallized.
- Built according to CE guidelines.
- Assembly of the air hands and electrical connections of the truck at the rear in the body.
- Luxury enclosure in aluminum version highly adapted to the 8x4 chassis incl. fly-over, mounting the standard forks in the enclosure, LED cabinet lighting, installation installation on the chassis.
- LED light bar mounted on the flyer.
- Lighting control switches mounted in the control box and in the cabin.
- LED flash lamps mounted at the rear.
- 6 work lights mounted (under the flyer, high at the rear and low).
- LED lamps mounted on the corners of the enclosure.
- Starting aid 12/24 volts.
- Air reel mounted.
- Spray the installation in finish.
- 7-wire electrical cable reel installed.
- Container for counterweight mounted behind the cab.
- Base plate for lateral stability (standard legs only)
- 2 fork raisers
- 2 pieces of anchor plates for Wheel chocks
- Two WLL 15 tonne folding discs
- European approved buffer beam at the rear.
- Pulling device with pin 40, 50 and 60 mm
- 2 models towing eyes.
- RDW inspection and, if necessary, TüV.
- Ballast under the bumper.

More information

Cab: Globetrotter, single
Axle 1: Tyre size: 385/65 R22.5; Max. axle load: 9000 kg; Steering
Axle 2: Tyre size: 385/65 R22.5; Max. axle load: 9000 kg; Steering
Axle 3: Tyre size: 315/70 R22.5; Differential lock; Max. axle load: 9500 kg; Reduction: hub reduction
Axle 4: Tyre size: 315/70 R22.5; Differential lock; Max. axle load: 9500 kg; Reduction: hub reduction
Registration number: 28-BPD-3

🇩🇪 Informationen auf Deutsch:
Weitere Optionen und Zubehör

Adaptive Cruise Control
Kühlschrank
Standheizung

Weitere Informationen

Kabine: Globetrotter, einfach
Achse 1: Reifenmaß: 385/65 R22.5; Max. Achslast: 9000 kg; Gelenkt
Achse 2: Reifenmaß: 385/65 R22.5; Max. Achslast: 9000 kg; Gelenkt
Achse 3: Reifenmaß: 315/70 R22.5; Differenzialsperre; Max. Achslast: 9500 kg; Reduzierung: Ausenplanetenachsen
Achse 4: Reifenmaß: 315/70 R22.5; Differenzialsperre; Max. Achslast: 9500 kg; Reduzierung: Ausenplanetenachsen
Kennzeichen: 28-BPD-3

🇳🇱 Informatie in het Nederlands:
Aanvullende opties en accessoires

2 Bedden
Adaptive Cruise Control
Cabinezijfenders
Climate Control (ATC)
Elektrisch spiegels
Koelkast
Lane Change Support
Oliekoeler
SMART TACHO 2
Standkachel
Verstralers op het dak
Volvo Dynamic Steering
WhatsApp
Zwaailampen

Bijzonderheden

Meer informatie

Cabine: Globetrotter, enkel
As 1: Bandenmaat: 385/65 R22.5; Max. aslast: 9000 kg; Meesturend
As 2: Bandenmaat: 385/65 R22.5; Max. aslast: 9000 kg; Meesturend
As 3: Bandenmaat: 315/70 R22.5; Differentieelslot; Max. aslast: 9500 kg; Reductie: naafreductie
As 4: Bandenmaat: 315/70 R22.5; Differentieelslot; Max. aslast: 9500 kg; Reductie: naafreductie
Kenteken: 28-BPD-3

Référence parc : 323949,
Année de construction : 2020,
Nombre de roues motrices : 4,
Informations pneus ou train de chaînes : Axle 1: Tyre size: 385/65 R22.5; Axle 2: Tyre size: 385/65 R22.5; Axle 3: Tyre size: 315/70 R22.5; Axle 4: Tyre size: 315/70 R22.5,
Nombre d'essieux : 4,
Suspension d'essieu,
Stores,
Capacité : 13tonnes,
Capacité maximum : 13tonnes,
Prise de force,
Visière pare-soleil,
Charge utile : 13.275tonnes,
Autoradio,
Nombre de portes : 2,
Couchette chauffeur,
Poids : 23.725kg,
Frein à disque,
Vitres électriques,
Capacité de chargement : 13275kg,
Tempomat,
Cruise control,
Vitres électriques,
Type d'intérieur : Autre,
Type de pneus : Jumelés,
Couleur : Jaune

Vreau sa văd tot

Observaţii
🇬🇧 Information in English: Additional options and accessories 2 Bedden Adaptive Cruise Control Cabinezijfenders Climate Control (ATC) Elektrisch spiegels Koelkast Lane Change Support Oliekoeler SMART TACHO 2 Standkachel Verstralers op het dak Volvo Dynamic Steering WhatsApp Zwaailampen Remarks Falkom wrecker installation type FAW 25.000 - One main arm. - A two-stage hydraulically extendable lift arm, very low; Highest step forearm 195 mm, arm length to center bus frame 4.55 m. - A fully hydraulic installation consisting of: - hoses - couplings - pipes - 8-function valve block - Two double-acting lifting cylinders take care of the up and down movement of the main arm. - The installation is also executed with a so-called "Powertilt" installation to minimize damage to spoilers e.d. - The assembly is assembled on a subframe, etc. in accordance with specifications of the truck chassis and sprayed in the primer (RAL 2004). - 2 anchors model working independently of each other standard. - A lift beam (100 x 100 mm tube). - Three sets of fork holders. - 4 sets of V forks. - 1 Set of chain forks. - 1 Set of euro forks (German version 1 set of euro forks model small and 3 set for axle forks). - Set of Scania claws with mounting brackets on the lift beam. - Set of air suspension forks. - 1 bus frame. - Tow bar mounted. - Shovel and broom mounted. - Oil tank. - Pulling device with trawler in combination with a semi-trailer link. - Supported drawbar coupling support. - Two 20 ton hydraulic winches (Sepson H 200), which are equipped with two speeds and a pneumatic freewheel. - Hydraulic double pump. - Radio remote control for all functions, excluding anchor shovels - Complete installation is stacked / metallized. - Built according to CE guidelines. - Assembly of the air hands and electrical connections of the truck at the rear in the body. - Luxury enclosure in aluminum version highly adapted to the 8x4 chassis incl. fly-over, mounting the standard forks in the enclosure, LED cabinet lighting, installation installation on the chassis. - LED light bar mounted on the flyer. - Lighting control switches mounted in the control box and in the cabin. - LED flash lamps mounted at the rear. - 6 work lights mounted (under the flyer, high at the rear and low). - LED lamps mounted on the corners of the enclosure. - Starting aid 12/24 volts. - Air reel mounted. - Spray the installation in finish. - 7-wire electrical cable reel installed. - Container for counterweight mounted behind the cab. - Base plate for lateral stability (standard legs only) - 2 fork raisers - 2 pieces of anchor plates for Wheel chocks - Two WLL 15 tonne folding discs - European approved buffer beam at the rear. - Pulling device with pin 40, 50 and 60 mm - 2 models towing eyes. - RDW inspection and, if necessary, TüV. - Ballast under the bumper. More information Cab: Globetrotter, single Axle 1: Tyre size: 385/65 R22.5; Max. axle load: 9000 kg; Steering Axle 2: Tyre size: 385/65 R22.5; Max. axle load: 9000 kg; Steering Axle 3: Tyre size: 315/70 R22.5; Differential lock; Max. axle load: 9500 kg; Reduction: hub reduction Axle 4: Tyre size: 315/70 R22.5; Differential lock; Max. axle load: 9500 kg; Reduction: hub reduction Registration number: 28-BPD-3 🇩🇪 Informationen auf Deutsch: Weitere Optionen und Zubehör Adaptive Cruise Control Kühlschrank Standheizung Weitere Informationen Kabine: Globetrotter, einfach Achse 1: Reifenmaß: 385/65 R22.5; Max. Achslast: 9000 kg; Gelenkt Achse 2: Reifenmaß: 385/65 R22.5; Max. Achslast: 9000 kg; Gelenkt Achse 3: Reifenmaß: 315/70 R22.5; Differenzialsperre; Max. Achslast: 9500 kg; Reduzierung: Ausenplanetenachsen Achse 4: Reifenmaß: 315/70 R22.5; Differenzialsperre; Max. Achslast: 9500 kg; Reduzierung: Ausenplanetenachsen Kennzeichen: 28-BPD-3 🇳🇱 Informatie in het Nederlands: Aanvullende opties en accessoires 2 Bedden Adaptive Cruise Control Cabinezijfenders Climate Control (ATC) Elektrisch spiegels Koelkast Lane Change Support Oliekoeler SMART TACHO 2 Standkachel Verstralers op het dak Volvo Dynamic Steering WhatsApp Zwaailampen Bijzonderheden Falkom wrecker installation type FAW 25.000 - One main arm. - A two-stage hydraulically extendable lift arm, very low; Highest step forearm 195 mm, arm length to center bus frame 4.55 m. - A fully hydraulic installation consisting of: - hoses - couplings - pipes - 8-function valve block - Two double-acting lifting cylinders take care of the up and down movement of the main arm. - The installation is also executed with a so-called "Powertilt" installation to minimize damage to spoilers e.d. - The assembly is assembled on a subframe, etc. in accordance with specifications of the truck chassis and sprayed in the primer (RAL 2004). - 2 anchors model working independently of each other standard. - A lift beam (100 x 100 mm tube). - Three sets of fork holders. - 4 sets of V forks. - 1 Set of chain forks. - 1 Set of euro forks (German version 1 set of euro forks model small and 3 set for axle forks). - Set of Scania claws with mounting brackets on the lift beam. - Set of air suspension forks. - 1 bus frame. - Tow bar mounted. - Shovel and broom mounted. - Oil tank. - Pulling device with trawler in combination with a semi-trailer link. - Supported drawbar coupling support. - Two 20 ton hydraulic winches (Sepson H 200), which are equipped with two speeds and a pneumatic freewheel. - Hydraulic double pump. - Radio remote control for all functions, excluding anchor shovels - Complete installation is stacked / metallized. - Built according to CE guidelines. - Assembly of the air hands and electrical connections of the truck at the rear in the body. - Luxury enclosure in aluminum version highly adapted to the 8x4 chassis incl. fly-over, mounting the standard forks in the enclosure, LED cabinet lighting, installation installation on the chassis. - LED light bar mounted on the flyer. - Lighting control switches mounted in the control box and in the cabin. - LED flash lamps mounted at the rear. - 6 work lights mounted (under the flyer, high at the rear and low). - LED lamps mounted on the corners of the enclosure. - Starting aid 12/24 volts. - Air reel mounted. - Spray the installation in finish. - 7-wire electrical cable reel installed. - Container for counterweight mounted behind the cab. - Base plate for lateral stability (standard legs only) - 2 fork raisers - 2 pieces of anchor plates for Wheel chocks - Two WLL 15 tonne folding discs - European approved buffer beam at the rear. - Pulling device with pin 40, 50 and 60 mm - 2 models towing eyes. - RDW inspection and, if necessary, TüV. - Ballast under the bumper. Meer informatie Cabine: Globetrotter, enkel As 1: Bandenmaat: 385/65 R22.5; Max. aslast: 9000 kg; Meesturend As 2: Bandenmaat: 385/65 R22.5; Max. aslast: 9000 kg; Meesturend As 3: Bandenmaat: 315/70 R22.5; Differentieelslot; Max. aslast: 9500 kg; Reductie: naafreductie As 4: Bandenmaat: 315/70 R22.5; Differentieelslot; Max. aslast: 9500 kg; Reductie: naafreductie Kenteken: 28-BPD-3 Référence parc : 323949, Année de construction : 2020, Nombre de roues motrices : 4, Informations pneus ou train de chaînes : Axle 1: Tyre size: 385/65 R22.5; Axle 2: Tyre size: 385/65 R22.5; Axle 3: Tyre size: 315/70 R22.5; Axle 4: Tyre size: 315/70 R22.5, Nombre d'essieux : 4, Suspension d'essieu, Stores, Capacité : 13tonnes, Capacité maximum : 13tonnes, Prise de force, Visière pare-soleil, Charge utile : 13.275tonnes, Autoradio, Nombre de portes : 2, Couchette chauffeur, Poids : 23.725kg, Frein à disque, Vitres électriques, Capacité de chargement : 13275kg, Tempomat, Cruise control, Vitres électriques, Type d'intérieur : Autre, Type de pneus : Jumelés, Couleur : Jaune

Observaţii

🇬🇧 Information in English:
Additional options and accessories

2 Bedden
Adaptive Cruise Control
Cabinezijfenders
Climate Control (ATC)
Elektrisch spiegels
Koelkast
Lane Change Support
Oliekoeler
SMART TACHO 2
Standkachel
Verstralers op het dak
Volvo Dynamic Steering
WhatsApp
Zwaailampen

Remarks

More information

🇩🇪 Informationen auf Deutsch:
Weitere Optionen und Zubehör

Adaptive Cruise Control
Kühlschrank
Standheizung

Weitere Informationen

🇳🇱 Informatie in het Nederlands:
Aanvullende opties en accessoires

2 Bedden
Adaptive Cruise Control
Cabinezijfenders
Climate Control (ATC)
Elektrisch spiegels
Koelkast
Lane Change Support
Oliekoeler
SMART TACHO 2
Standkachel
Verstralers op het dak
Volvo Dynamic Steering
WhatsApp
Zwaailampen

Bijzonderheden

Meer informatie

Istoricul vehiculului

Verifică istoricul vehiculului cu

Tarif de vânzare

Preț la cerere

Informaţii principale
Ref. client:	HE-NE
Ref. website:	11304821
Caroserie	--
Marcă	Volvo
Gamă (marcă : Volvo)	FH
Model	500 - FALKOM FAW 25.000 - !! Viewing by appointment only !!
Stare	Second-hand
Data primei înmatriculări	03/01/2020
Ţara	OLANDA
Constructor	Volvo

Informaţii suplimentare Volvo 500 - FALKOM FAW...
Data ultimei verificări tehnice	03/01/2026
Data de expirare a înmatriculării	03/01/2027
Retarder hidraulic

Tonaj
Sarcină utilă	13.28 Tone
Masă Proprie	23.73 Tone
Sarcină Utilă Maximă	37 Tone

Anvelope
Stare şi dimensiuni anvelope	22.5

Informaţii cabină FH
Lungime cabină	Scurtă

Echipament Camion Volvo
Suspensie pe aer Suspensie mecanică ABS Cruise Control

Caracteristici Volvo FH
Kilometraj	130 000 km
Norme Euro	Volvo Euro 6
Ţara (gamă)	OLANDA

Starea utilajului
Alimentare/Carburant	Motorină

motor
Putere	509 CP
Puterea motorului	375 kW
Capacitate cilindrică	12777 cm3
Număr de cilindri	6

Cutie de viteze și de transmisie
Specificaţii cutie de viteză	Automaat
Cutie de viteze	Cutie automată

Suspensie / Axe
Ampatament	5.6 metri
Osii	8x4

Echipament cabină
Climatizare Închidere centralizată

Observaţii
🇬🇧 Information in English: Additional options and accessories 2 Bedden Adaptive Cruise Control Cabinezijfenders Climate Control (ATC) Elektrisch spiegels Koelkast Lane Change Support Oliekoeler SMART TACHO 2 Standkachel Verstralers op het dak Volvo Dynamic Steering WhatsApp Zwaailampen Remarks Falkom wrecker installation type FAW 25.000 - One main arm. - A two-stage hydraulically extendable lift arm, very low; Highest step forearm 195 mm, arm length to center bus frame 4.55 m. - A fully hydraulic installation consisting of: - hoses - couplings - pipes - 8-function valve block - Two double-acting lifting cylinders take care of the up and down movement of the main arm. - The installation is also executed with a so-called "Powertilt" installation to minimize damage to spoilers e.d. - The assembly is assembled on a subframe, etc. in accordance with specifications of the truck chassis and sprayed in the primer (RAL 2004). - 2 anchors model working independently of each other standard. - A lift beam (100 x 100 mm tube). - Three sets of fork holders. - 4 sets of V forks. - 1 Set of chain forks. - 1 Set of euro forks (German version 1 set of euro forks model small and 3 set for axle forks). - Set of Scania claws with mounting brackets on the lift beam. - Set of air suspension forks. - 1 bus frame. - Tow bar mounted. - Shovel and broom mounted. - Oil tank. - Pulling device with trawler in combination with a semi-trailer link. - Supported drawbar coupling support. - Two 20 ton hydraulic winches (Sepson H 200), which are equipped with two speeds and a pneumatic freewheel. - Hydraulic double pump. - Radio remote control for all functions, excluding anchor shovels - Complete installation is stacked / metallized. - Built according to CE guidelines. - Assembly of the air hands and electrical connections of the truck at the rear in the body. - Luxury enclosure in aluminum version highly adapted to the 8x4 chassis incl. fly-over, mounting the standard forks in the enclosure, LED cabinet lighting, installation installation on the chassis. - LED light bar mounted on the flyer. - Lighting control switches mounted in the control box and in the cabin. - LED flash lamps mounted at the rear. - 6 work lights mounted (under the flyer, high at the rear and low). - LED lamps mounted on the corners of the enclosure. - Starting aid 12/24 volts. - Air reel mounted. - Spray the installation in finish. - 7-wire electrical cable reel installed. - Container for counterweight mounted behind the cab. - Base plate for lateral stability (standard legs only) - 2 fork raisers - 2 pieces of anchor plates for Wheel chocks - Two WLL 15 tonne folding discs - European approved buffer beam at the rear. - Pulling device with pin 40, 50 and 60 mm - 2 models towing eyes. - RDW inspection and, if necessary, TüV. - Ballast under the bumper. More information Cab: Globetrotter, single Axle 1: Tyre size: 385/65 R22.5; Max. axle load: 9000 kg; Steering Axle 2: Tyre size: 385/65 R22.5; Max. axle load: 9000 kg; Steering Axle 3: Tyre size: 315/70 R22.5; Differential lock; Max. axle load: 9500 kg; Reduction: hub reduction Axle 4: Tyre size: 315/70 R22.5; Differential lock; Max. axle load: 9500 kg; Reduction: hub reduction Registration number: 28-BPD-3 🇩🇪 Informationen auf Deutsch: Weitere Optionen und Zubehör Adaptive Cruise Control Kühlschrank Standheizung Weitere Informationen Kabine: Globetrotter, einfach Achse 1: Reifenmaß: 385/65 R22.5; Max. Achslast: 9000 kg; Gelenkt Achse 2: Reifenmaß: 385/65 R22.5; Max. Achslast: 9000 kg; Gelenkt Achse 3: Reifenmaß: 315/70 R22.5; Differenzialsperre; Max. Achslast: 9500 kg; Reduzierung: Ausenplanetenachsen Achse 4: Reifenmaß: 315/70 R22.5; Differenzialsperre; Max. Achslast: 9500 kg; Reduzierung: Ausenplanetenachsen Kennzeichen: 28-BPD-3 🇳🇱 Informatie in het Nederlands: Aanvullende opties en accessoires 2 Bedden Adaptive Cruise Control Cabinezijfenders Climate Control (ATC) Elektrisch spiegels Koelkast Lane Change Support Oliekoeler SMART TACHO 2 Standkachel Verstralers op het dak Volvo Dynamic Steering WhatsApp Zwaailampen Bijzonderheden Falkom wrecker installation type FAW 25.000 - One main arm. - A two-stage hydraulically extendable lift arm, very low; Highest step forearm 195 mm, arm length to center bus frame 4.55 m. - A fully hydraulic installation consisting of: - hoses - couplings - pipes - 8-function valve block - Two double-acting lifting cylinders take care of the up and down movement of the main arm. - The installation is also executed with a so-called "Powertilt" installation to minimize damage to spoilers e.d. - The assembly is assembled on a subframe, etc. in accordance with specifications of the truck chassis and sprayed in the primer (RAL 2004). - 2 anchors model working independently of each other standard. - A lift beam (100 x 100 mm tube). - Three sets of fork holders. - 4 sets of V forks. - 1 Set of chain forks. - 1 Set of euro forks (German version 1 set of euro forks model small and 3 set for axle forks). - Set of Scania claws with mounting brackets on the lift beam. - Set of air suspension forks. - 1 bus frame. - Tow bar mounted. - Shovel and broom mounted. - Oil tank. - Pulling device with trawler in combination with a semi-trailer link. - Supported drawbar coupling support. - Two 20 ton hydraulic winches (Sepson H 200), which are equipped with two speeds and a pneumatic freewheel. - Hydraulic double pump. - Radio remote control for all functions, excluding anchor shovels - Complete installation is stacked / metallized. - Built according to CE guidelines. - Assembly of the air hands and electrical connections of the truck at the rear in the body. - Luxury enclosure in aluminum version highly adapted to the 8x4 chassis incl. fly-over, mounting the standard forks in the enclosure, LED cabinet lighting, installation installation on the chassis. - LED light bar mounted on the flyer. - Lighting control switches mounted in the control box and in the cabin. - LED flash lamps mounted at the rear. - 6 work lights mounted (under the flyer, high at the rear and low). - LED lamps mounted on the corners of the enclosure. - Starting aid 12/24 volts. - Air reel mounted. - Spray the installation in finish. - 7-wire electrical cable reel installed. - Container for counterweight mounted behind the cab. - Base plate for lateral stability (standard legs only) - 2 fork raisers - 2 pieces of anchor plates for Wheel chocks - Two WLL 15 tonne folding discs - European approved buffer beam at the rear. - Pulling device with pin 40, 50 and 60 mm - 2 models towing eyes. - RDW inspection and, if necessary, TüV. - Ballast under the bumper. Meer informatie Cabine: Globetrotter, enkel As 1: Bandenmaat: 385/65 R22.5; Max. aslast: 9000 kg; Meesturend As 2: Bandenmaat: 385/65 R22.5; Max. aslast: 9000 kg; Meesturend As 3: Bandenmaat: 315/70 R22.5; Differentieelslot; Max. aslast: 9500 kg; Reductie: naafreductie As 4: Bandenmaat: 315/70 R22.5; Differentieelslot; Max. aslast: 9500 kg; Reductie: naafreductie Kenteken: 28-BPD-3 Référence parc : 323949, Année de construction : 2020, Nombre de roues motrices : 4, Informations pneus ou train de chaînes : Axle 1: Tyre size: 385/65 R22.5; Axle 2: Tyre size: 385/65 R22.5; Axle 3: Tyre size: 315/70 R22.5; Axle 4: Tyre size: 315/70 R22.5, Nombre d'essieux : 4, Suspension d'essieu, Stores, Capacité : 13tonnes, Capacité maximum : 13tonnes, Prise de force, Visière pare-soleil, Charge utile : 13.275tonnes, Autoradio, Nombre de portes : 2, Couchette chauffeur, Poids : 23.725kg, Frein à disque, Vitres électriques, Capacité de chargement : 13275kg, Tempomat, Cruise control, Vitres électriques, Type d'intérieur : Autre, Type de pneus : Jumelés, Couleur : Jaune
Vreau sa văd tot

Observaţii

🇬🇧 Information in English:
Additional options and accessories

2 Bedden
Adaptive Cruise Control
Cabinezijfenders
Climate Control (ATC)
Elektrisch spiegels
Koelkast
Lane Change Support
Oliekoeler
SMART TACHO 2
Standkachel
Verstralers op het dak
Volvo Dynamic Steering
WhatsApp
Zwaailampen

Remarks

More information

🇩🇪 Informationen auf Deutsch:
Weitere Optionen und Zubehör

Adaptive Cruise Control
Kühlschrank
Standheizung

Weitere Informationen

🇳🇱 Informatie in het Nederlands:
Aanvullende opties en accessoires

2 Bedden
Adaptive Cruise Control
Cabinezijfenders
Climate Control (ATC)
Elektrisch spiegels
Koelkast
Lane Change Support
Oliekoeler
SMART TACHO 2
Standkachel
Verstralers op het dak
Volvo Dynamic Steering
WhatsApp
Zwaailampen

Bijzonderheden

Meer informatie

Vreau sa văd tot

Observaţii
🇬🇧 Information in English: Additional options and accessories 2 Bedden Adaptive Cruise Control Cabinezijfenders Climate Control (ATC) Elektrisch spiegels Koelkast Lane Change Support Oliekoeler SMART TACHO 2 Standkachel Verstralers op het dak Volvo Dynamic Steering WhatsApp Zwaailampen Remarks Falkom wrecker installation type FAW 25.000 - One main arm. - A two-stage hydraulically extendable lift arm, very low; Highest step forearm 195 mm, arm length to center bus frame 4.55 m. - A fully hydraulic installation consisting of: - hoses - couplings - pipes - 8-function valve block - Two double-acting lifting cylinders take care of the up and down movement of the main arm. - The installation is also executed with a so-called "Powertilt" installation to minimize damage to spoilers e.d. - The assembly is assembled on a subframe, etc. in accordance with specifications of the truck chassis and sprayed in the primer (RAL 2004). - 2 anchors model working independently of each other standard. - A lift beam (100 x 100 mm tube). - Three sets of fork holders. - 4 sets of V forks. - 1 Set of chain forks. - 1 Set of euro forks (German version 1 set of euro forks model small and 3 set for axle forks). - Set of Scania claws with mounting brackets on the lift beam. - Set of air suspension forks. - 1 bus frame. - Tow bar mounted. - Shovel and broom mounted. - Oil tank. - Pulling device with trawler in combination with a semi-trailer link. - Supported drawbar coupling support. - Two 20 ton hydraulic winches (Sepson H 200), which are equipped with two speeds and a pneumatic freewheel. - Hydraulic double pump. - Radio remote control for all functions, excluding anchor shovels - Complete installation is stacked / metallized. - Built according to CE guidelines. - Assembly of the air hands and electrical connections of the truck at the rear in the body. - Luxury enclosure in aluminum version highly adapted to the 8x4 chassis incl. fly-over, mounting the standard forks in the enclosure, LED cabinet lighting, installation installation on the chassis. - LED light bar mounted on the flyer. - Lighting control switches mounted in the control box and in the cabin. - LED flash lamps mounted at the rear. - 6 work lights mounted (under the flyer, high at the rear and low). - LED lamps mounted on the corners of the enclosure. - Starting aid 12/24 volts. - Air reel mounted. - Spray the installation in finish. - 7-wire electrical cable reel installed. - Container for counterweight mounted behind the cab. - Base plate for lateral stability (standard legs only) - 2 fork raisers - 2 pieces of anchor plates for Wheel chocks - Two WLL 15 tonne folding discs - European approved buffer beam at the rear. - Pulling device with pin 40, 50 and 60 mm - 2 models towing eyes. - RDW inspection and, if necessary, TüV. - Ballast under the bumper. More information Cab: Globetrotter, single Axle 1: Tyre size: 385/65 R22.5; Max. axle load: 9000 kg; Steering Axle 2: Tyre size: 385/65 R22.5; Max. axle load: 9000 kg; Steering Axle 3: Tyre size: 315/70 R22.5; Differential lock; Max. axle load: 9500 kg; Reduction: hub reduction Axle 4: Tyre size: 315/70 R22.5; Differential lock; Max. axle load: 9500 kg; Reduction: hub reduction Registration number: 28-BPD-3 🇩🇪 Informationen auf Deutsch: Weitere Optionen und Zubehör Adaptive Cruise Control Kühlschrank Standheizung Weitere Informationen Kabine: Globetrotter, einfach Achse 1: Reifenmaß: 385/65 R22.5; Max. Achslast: 9000 kg; Gelenkt Achse 2: Reifenmaß: 385/65 R22.5; Max. Achslast: 9000 kg; Gelenkt Achse 3: Reifenmaß: 315/70 R22.5; Differenzialsperre; Max. Achslast: 9500 kg; Reduzierung: Ausenplanetenachsen Achse 4: Reifenmaß: 315/70 R22.5; Differenzialsperre; Max. Achslast: 9500 kg; Reduzierung: Ausenplanetenachsen Kennzeichen: 28-BPD-3 🇳🇱 Informatie in het Nederlands: Aanvullende opties en accessoires 2 Bedden Adaptive Cruise Control Cabinezijfenders Climate Control (ATC) Elektrisch spiegels Koelkast Lane Change Support Oliekoeler SMART TACHO 2 Standkachel Verstralers op het dak Volvo Dynamic Steering WhatsApp Zwaailampen Bijzonderheden Falkom wrecker installation type FAW 25.000 - One main arm. - A two-stage hydraulically extendable lift arm, very low; Highest step forearm 195 mm, arm length to center bus frame 4.55 m. - A fully hydraulic installation consisting of: - hoses - couplings - pipes - 8-function valve block - Two double-acting lifting cylinders take care of the up and down movement of the main arm. - The installation is also executed with a so-called "Powertilt" installation to minimize damage to spoilers e.d. - The assembly is assembled on a subframe, etc. in accordance with specifications of the truck chassis and sprayed in the primer (RAL 2004). - 2 anchors model working independently of each other standard. - A lift beam (100 x 100 mm tube). - Three sets of fork holders. - 4 sets of V forks. - 1 Set of chain forks. - 1 Set of euro forks (German version 1 set of euro forks model small and 3 set for axle forks). - Set of Scania claws with mounting brackets on the lift beam. - Set of air suspension forks. - 1 bus frame. - Tow bar mounted. - Shovel and broom mounted. - Oil tank. - Pulling device with trawler in combination with a semi-trailer link. - Supported drawbar coupling support. - Two 20 ton hydraulic winches (Sepson H 200), which are equipped with two speeds and a pneumatic freewheel. - Hydraulic double pump. - Radio remote control for all functions, excluding anchor shovels - Complete installation is stacked / metallized. - Built according to CE guidelines. - Assembly of the air hands and electrical connections of the truck at the rear in the body. - Luxury enclosure in aluminum version highly adapted to the 8x4 chassis incl. fly-over, mounting the standard forks in the enclosure, LED cabinet lighting, installation installation on the chassis. - LED light bar mounted on the flyer. - Lighting control switches mounted in the control box and in the cabin. - LED flash lamps mounted at the rear. - 6 work lights mounted (under the flyer, high at the rear and low). - LED lamps mounted on the corners of the enclosure. - Starting aid 12/24 volts. - Air reel mounted. - Spray the installation in finish. - 7-wire electrical cable reel installed. - Container for counterweight mounted behind the cab. - Base plate for lateral stability (standard legs only) - 2 fork raisers - 2 pieces of anchor plates for Wheel chocks - Two WLL 15 tonne folding discs - European approved buffer beam at the rear. - Pulling device with pin 40, 50 and 60 mm - 2 models towing eyes. - RDW inspection and, if necessary, TüV. - Ballast under the bumper. Meer informatie Cabine: Globetrotter, enkel As 1: Bandenmaat: 385/65 R22.5; Max. aslast: 9000 kg; Meesturend As 2: Bandenmaat: 385/65 R22.5; Max. aslast: 9000 kg; Meesturend As 3: Bandenmaat: 315/70 R22.5; Differentieelslot; Max. aslast: 9500 kg; Reductie: naafreductie As 4: Bandenmaat: 315/70 R22.5; Differentieelslot; Max. aslast: 9500 kg; Reductie: naafreductie Kenteken: 28-BPD-3 Référence parc : 323949, Année de construction : 2020, Nombre de roues motrices : 4, Informations pneus ou train de chaînes : Axle 1: Tyre size: 385/65 R22.5; Axle 2: Tyre size: 385/65 R22.5; Axle 3: Tyre size: 315/70 R22.5; Axle 4: Tyre size: 315/70 R22.5, Nombre d'essieux : 4, Suspension d'essieu, Stores, Capacité : 13tonnes, Capacité maximum : 13tonnes, Prise de force, Visière pare-soleil, Charge utile : 13.275tonnes, Autoradio, Nombre de portes : 2, Couchette chauffeur, Poids : 23.725kg, Frein à disque, Vitres électriques, Capacité de chargement : 13275kg, Tempomat, Cruise control, Vitres électriques, Type d'intérieur : Autre, Type de pneus : Jumelés, Couleur : Jaune

Observaţii

🇬🇧 Information in English:
Additional options and accessories